APX 18SA (Subwoofer activo de madera de 18″ de la serie Line Array APX)

Subwoofer activo de madera de 18″ para emparejar con los satélites APX28HA.

Compuesto por 1 subwoofer Celestion de 18″ y amplificador de Clase D PFC 3000W Programa / 6000W Pico. con DSP.

 

    Consultar disponibilidad




      Consultar precios

      Descripción

      Subwoofer activo de madera de 18″ para emparejar con los satélites APX28HA.

      Compuesto por 1 subwoofer Celestion de 18″ y amplificador de Clase D PFC 3000W Programa / 6000W Pico. con DSP.

       

       

      APX 18 A SUBWOOFER
      System Active Subwoofer, Active Array Element
      AMP POWER Class D 1500 W Continuous, 6000 W Peak
      Speaker 1 x 18” Celestion, Ferrite Magnet Subwoofer, 4“ Voice Coil, 1200 W-RMS, Water Resistant Coating
      Frequency Response (+/-3dB) 30 Hz – 120 Hz
      MAXIMUM SPL @ 1m 130dB (continuous) / 136dB (peak)
      Cooling Passive Cooling + Inside Fan
      Input Connector XLR In / Link / DSP Module with RJ45 Date In & Link Cascading Connector
      External Controls 9 Preset EQ /1 Service Use / Power ON with Green LED / Clip / SIG / PROT With LED
      DSP Processor 32 bit , 24bit/48kHz Audio conversion AD/DA, Digital Volume Control
      Electronic Protections Thermal / Convection-Fan / Overload / Digital Limiter / Compressor
      MAINS CONNECTOR Neutrik PowerCON Connector In & Link
      MAINS CONNECTOR 16A UL & VDE & SEV
      Power Supply Auto-Range 100V-120V / 220V-240V 50Hz/60Hz
      Enclosure Construction 18mm Birch Plywood, Resistant Black Paint, 1.5T Metal Grille with Foam, Rubber Feet, Two Handles on Each Side, Water Resistant Coating
      Mounting One Metal M20 Pole-mount, Four-point Suspension, Three configuration styles (Small, Stack & Array)
      Dimensions (HxWxD) 620 x 640 x 700 mm
      Net Weight 58.5 kg / 128.7 Ibs
      Accessories Flybar / Adaptor / Ground stacking bar / Rolling Wheel / Flying Pin / DSP control center