VHD5.0 Mid Hi Module
The VHD5.0 is a three‑way enclosure handling low mids, mids and highs over a frequency range from 45Hz through to 20kHz. It incorporates eight front‑loaded ten inch low mid drivers, six horn‑loaded eight inch mid range drivers and three 3“ NVPD (Nitrate Vapour Particle Deposition) Titanium compression drivers on a custom designed, manifold horn assembly with summing waveguide. With the capacity to run full range down to 45Hz the VHD5.0 is usually crossed over at 70Hz to the VHD4.21 Active Sub Bass Modules. Both the VHD5.0 and VHD8.10 cabinets incorporate very simple to use integrated fly ware that links cabinets together quickly and easily.
Applications
Designed as an extreme high output and performance mid-hi unit as part of the VHD5 Constant Power Point Source systems for large arenas and stadiums
- Medium to large concert venues
- Hire and Production
- Large Clubs and Arenas
Product code
KVV 987 342
Descripción
The VHD5.0 is a three‑way enclosure handling low mids, mids and highs over a frequency range from 45Hz through to 20kHz. It incorporates eight front‑loaded ten inch low mid drivers, six horn‑loaded eight inch mid range drivers and three 3“ NVPD (Nitrate Vapour Particle Deposition) Titanium compression drivers on a custom designed, manifold horn assembly with summing waveguide. With the capacity to run full range down to 45Hz the VHD5.0 is usually crossed over at 70Hz to the VHD4.21 Active Sub Bass Modules. Both the VHD5.0 and VHD8.10 cabinets incorporate very simple to use integrated fly ware that links cabinets together quickly and easily.
Applications
Designed as an extreme high output and performance mid-hi unit as part of the VHD5 Constant Power Point Source systems for large arenas and stadiums
- Medium to large concert venues
- Hire and Production
- Large Clubs and Arenas
Product code
KVV 987 342
Configurations
VHD5 – A
VHD5 – B
VHD5 – C
VHD5 – DVHD5 – A
Description
The VHD5 is a Constant Power Point Source System designed for large audiences, extremely long throw and intended to be flown at a minimum height of 10 metres.
One side of the full system with three VHD8.10 Low Mid modules, one VHD5.0 Mid Hi and a VHD5.1 downfill. Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid, and VHD5100 for downfill. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
Products
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 3 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5.1 Downfill | MID-HI |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
Accessories
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
| 1 | VHD5 Downfill bracket | VHD5 Downfill bracket |
Images
VHD5 – B
Description
The VHD5 is a Constant Power Point Source System designed for large audiences, extremely long throw and intended to be flown at a minimum height of 10 metres.
One side of the full system with two VHD8.10 Low Mid modules and one VHD5.0 Mid Hi. Amplification provided by two rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid.
Everything is distributed by a single multicable through the Power Unit. With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
Products
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 3 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
Accessories
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
Images
VHD5 – C
Description
The VHD5 is a Constant Power Point Source System designed for large audiences, long throw and intended to be flown at a minimum height of 10 metres.One side of the full system with two VHD8.10 Low Mid modules, one VHD5.0 Mid Hi and a VHD5.1 downfill.
Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid, and VHD5100 for downfill. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
Products
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 2 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5.1 Downfill | MID-HI |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
Accessories
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
| 1 | VHD5 Downfill bracket | VHD5 Downfill bracket |
Images
VHD5 – D
Description
The VHD5 is a Constant Power Point Source System designed for large audiences, long throw and intended to be flown at a minimum height of 10 metres. One side of the full system with two VHD8.10 Low Mid modules and one VHD5.0 Mid Hi.
Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi and VHD5000S for Low Mid. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
Products
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 2 | VHD8.10 Low Mid | Low Mid |
Accessories
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
Images
Accesories
VHD5 Extension cable
VHD5 Flybar case
VHD5 Multicable
VHD5 Pan flybar
VHD5 Power unit
VHD5 Rack case
VHD5 Tilt flybar
VHD5.0 Padded cover
VHD5.0, VHD8.10 CartVHD5 Extension cable
Gallery
Product code
KVV 987 409
Description
Extension cable for VHD5 System (25 m)
VHD5 Flybar case
Gallery
Product code
KVV 987 414
Description
Flybar Case for VHD5.0 Flybar
VHD5 Multicable
Gallery
Product code
KVV 987 364
Description
Multicable for VHD5 System.
VHD5 Pan flybar
3D view
Gallery
Product code
KVV 987 413
Description
Pan Flybar for VHD5.0
Downloads
VHD5 Pan Flybar 3D DWG
VHD5 Pan Flybar 3D DWG
VHD5 Rigging Manual
VHD5 Rigging Manual
VHD5 Pan flybar 3D DWG
VHD5 Pan flybar 3D DWG
VHD5 Pan flybar SKP
VHD5 Pan flybar SketchUp
VHD5 Power unit
Gallery
Product code
KVV 987 363
Description
VHD5.0 dedicated Power Unit
Downloads
VHD5 Power unit 3D DWG
VHD5 Power unit 3D DWG
VHD5 Power unit SKP
VHD5 Power unit SketchUp
VHD5 Rack case
Gallery
Product code
KVV 987 365
Description
Rack case for VHD5000, VHD5000S, VHD5100 amplifiers, Power unit and 1 spare rack position.
VHD5 Tilt flybar
3D view
Gallery
Product code
KVV 987 420
Description
Tilt Flybar for VHD5.0
Downloads
VHD5 Tilt Flybar 3D DWG
VHD5 Tilt Flybar 3D DWG
VHD5 Rigging Manual
VHD5 Rigging Manual
VHD5 Tilt Flybar SketchUp
VHD5 Tilt Flybar SketchUp
VHD5.0 Padded cover
Gallery
Product code
KVV 987 370
Description
Padded cover for VHD5.0 Mid Hi module used with cart
VHD5.0, VHD8.10 Cart
Gallery
Product code
KVV 987 369
Description
Cart for VHD5.0, VHD8.10
Downloads
VHD5.0, VHD8.10 Cart 3D DWG
VHD5.0, VHD8.10 Cart 3D DWG
VHD5.0, VHD8.10 Cart SKP
VHD5.0, VHD8.10 Cart SketchUp
System Acoustic Performance
| Max SPL Long-term | 147dB (with VHD8.10) |
| Max SPL Peak | 153dB (with VHD8.10) |
| -3dB Response | 50Hz to 20kHz (with VHD8.10) |
| -10dB Response | 45Hz to 22kHz (with VHD8.10) |
| Full Range mode -3dB Response | 45Hz to 20kHz (with VHD8.10) |
| Crossover Point | 70Hz, 400Hz, 2.0kHz (with VHD8.10) |
High Frequency Section
| Acoustic Design | Horn Loaded |
| Horn Coverage Horizontal / Vertical | 80° x 30° |
| High Frequency Amplifier Requirement | VHD5000 |
| Throat Exit Diameter / Diaphragm Size | 3x 1.4” / 3.0” |
| Diaphragm Material | Nitride Titanium |
| Magnet Type | Neodymium |
Mid Range Section
| Acoustic Design | Horn Loaded |
| Horn Coverage Horizontal / Vertical | 80° x 30° |
| Midrange Amplifier Requirement | VHD5000 |
| Woofer Size / Voice Coil Diameter | 6x 8” / 3.0” / Trans Coil |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Low Mid Section
| Acoustic Design | Front Loaded |
| Low Mid Amplifier Requirement | VHD5000S |
| Woofer Size / Voice Coil Diameter | 8x 10” / 3.0” |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium |
Cabinet
| Cabinet Material | Baltic birch |
| Handles | 6 |
| Color | Black (wear resistant polymer coating) |
Physical Dimensions
| Height | 1125mm (44.29″) |
| Width | 1110mm (43.7″) |
| Depth | 500mm (19.69″) |
| Weight | 151kg (332.2lbs) |
Product code
KVV 987 342
