MT-PA5030 PA Tower (300 kg)

Description

The new MILOS MT-PA5030 PA fly tower was designed for live events that require a compact PA fly tower for small systems that can be used both indoors and outdoors.
Set up is easy. Only a few 290 QTV truss components are needed to erect the tower and only 2 persons are required to accomplish this feat. Due to a height of just under 5 meters, approvals by authorities are not necessary. The design allows for placement of base cabinets or amplifier racks on top of the outriggers.


Code
MT-PA5030 5m
Height
5 m
Max. SWL
300 kg

    Consultar precios

    Descripción

    Description

    The new MILOS MT-PA5030 PA fly tower was designed for live events that require a compact PA fly tower for small systems that can be used both indoors and outdoors.
    Set up is easy. Only a few 290 QTV truss components are needed to erect the tower and only 2 persons are required to accomplish this feat. Due to a height of just under 5 meters, approvals by authorities are not necessary. The design allows for placement of base cabinets or amplifier racks on top of the outriggers.

    Key benefits

    •   Footprint at set up is 2.5 x 2 m 8.2′ x 6.6′ (width x depth)
    •   Max. load 300 kg (660 lbs)
    •  1.5 m2 (16.15 ft2) max. front surface area of the PA
    •  1.0 m2 (10.76 ft2) max. side surface area of the PA
    •  50 kg (110 lbs) required ballast
    •  20m/s (45 mph) in-service wind loading
    •  Out-of-service wind loading as per DIN-EN 13814
    •  Base frame is V-shaped steel centrepiece with set of 2 bespoke and 2 long MT2 outriggers
    •  Lifting operations with either electrical or manual chain hoists 
    •  EXE hoists recommended 
    • Head block equipped with double pulley system for attachment of safety chain or safety wire parallel to lifting chain.
    • Multiple attachment points on base for connection of hoists and safeties
    • Powder coat colour finish available on request

      

    Descargas